Overview
Strips Comfort measures temperature to ±0.2 °C, relative humidity to ±1.8 % and ambient light in lux, and reports them over LoRaWAN. It fixes with adhesive backing and, at under 3 mm, disappears along a skirting board, a door architrave or a window frame.
Use it to keep an office comfortable, to watch for damp in cellars and attics, or to feed a heating and ventilation system with the room data it needs. A magnet sensor is built in for the +Switch accessory, a slider with small magnets that turns the strip into a button for ordering a service or starting a scenario. IP63, for indoor and sheltered outdoor use.
Specifications
- Sensors
- Temperature, humidity, ambient light (lux), magnet sensor for +Switch
- Temperature accuracy
- ±0.2 °C
- Humidity accuracy
- ±1.8 % RH
- Protocol
- LoRaWAN 1.0.4, Class A, OTAA
- Frequency
- EU868 · US915 · AU915 · AS923 · KR920 · IN865 · JP920
- Battery
- Built-in LiMnO₂, 480 mAh, 10+ years
- Radio range
- Up to 10 km line of sight
- IP rating
- IP63
- Operating temp
- –20 to +60 °C
- Dimensions
- 195 × 15 × 3 mm
- Weight
- 11 g
- Mounting
- Adhesive backing; +Clip for rough or temporary surfaces
- Patent
- Granted: SE 537 509 · EP 3053152 · EP 3937144 · US 9,953,496 · US 10,720,033 · US 11,170,617
- Also available as
- Strips Comfort 800 for Z-Wave
Key features
- ✓Accurate where it matters: ±0.2 °C and ±1.8 % RH, accurate enough to control heating and ventilation as well as to log.
- ✓Blend-in design: Under 3 mm and adhesive-mounted, it disappears along a skirting board, a door architrave or a window frame.
- ✓Add a button with +Switch: The built-in magnet sensor reads the +Switch slider accessory, so the same strip can order cleaning or set a scene.
- ✓Over ten years, no maintenance: Deploy it across a whole building and leave it there: the battery lasts over ten years.
Accessoires
- Strips +Switch: Un bouton coulissant qui se clipse sur n’importe quel Strips pour LoRaWAN. Faites-le glisser pour commander un service, lancer une scène ou actionner un appareil — le capteur devient aussi une commande. Détails
- Strips +Clip: Un clip de fixation pour Strips : il maintient le capteur contre les surfaces irrégulières comme le béton, la brique ou le bois brut, où l’adhésif ne tient pas, et permet de le déplacer sans laisser de trace. Détails