Accessory
Strips +Clip
Mount a Strips where adhesive will not hold, and take it down again without a trace.
Overview
Strips +Clip was first made to hold Strips Drip close against a surface, so that it could follow the relative moisture in the material over time. It turned out to have many more uses.
Use it on rough surfaces such as concrete, brick or untreated wood, where the adhesive backing would not stick. And use it wherever a sensor needs to move: the adhesive is for permanent mounting, the clip is for the sensor you relocate between projects, or fix to a railing, a post or a piece of safety equipment. Strips Presence Ruggedized is normally mounted with +Clip.
Specifications
- Works with
- Every Strips, LoRaWAN and Z-Wave
- Use
- Rough surfaces; temporary or movable mounting; equipment and railings
- Mounting
- Screw or fix the clip, snap the strip in
Key features
- ✓Rough surfaces: Concrete, brick and untreated wood, where adhesive gives up.
- ✓Move it, no trace: Take the strip down and remount it elsewhere without residue.
- ✓Close to the material: Holds Strips Drip against a surface to follow moisture in the material over time.
- ✓Outdoor pairing: The standard mount for Strips Presence Ruggedized on lifebuoys, defibrillators and posts.