Overview
Strips Drip raises an alarm the moment its absorbent pads get wet, at the first drops rather than a puddle. Sensitivity is configurable, so a damp cellar floor and a burst hose can be told apart. A temperature sensor adds a freeze alarm for pipes at risk.
At 6 mm (the 3 mm strip plus a 3 mm plate carrying the absorbent pads), its slim, sturdy body fits concealed in the tight spaces where leaks start: under appliances, along pipe runs, in plant rooms and lift shafts. IP67, over ten years of battery life and up to 10 km of LoRaWAN range make it practical to fit across a whole estate. In Yggio a leak alarm can close a valve and alert facilities in the same rule.
Specifications
- Sensors
- Water leak (absorbent pads), temperature
- Alarms
- Leak (configurable sensitivity), freeze
- Protocol
- LoRaWAN 1.0.4, Class A, OTAA
- Frequency
- EU868 · US915 · AU915 · AS923 · KR920 · IN865
- Battery
- Built-in LiMnO₂, 480 mAh, 10+ years
- Range
- Up to 10 km line of sight
- IP rating
- IP67, indoor and sheltered outdoor
- Operating temp
- –20 to +60 °C
- Dimensions
- 195 × 15 × 6 mm: the 3 mm sensor plus a 3 mm plate with the absorbent pads
- Patent
- Granted: SE 537 509 · EP 3053152 · EP 3937144 · US 9,953,496 · US 10,720,033 · US 11,170,617
- Also available as
- Strips Drip 800 for Z-Wave
Key features
- ✓Catches the first drops: Absorbent pads on the underside react to the first moisture, with sensitivity you can tune.
- ✓Freeze alarm: The temperature sensor warns before pipes freeze, so you can prevent a leak rather than detect it.
- ✓Fits where leaks start: Slim and sturdy enough for under appliances, behind pipes and in plant rooms.
- ✓Over ten years, no maintenance: Set it and forget it: over ten years on the built-in battery, IP67.
Accessoires
- Strips +Clip: Un clip de fixation pour Strips : il maintient le capteur contre les surfaces irrégulières comme le béton, la brique ou le bois brut, où l’adhésif ne tient pas, et permet de le déplacer sans laisser de trace. Détails