Another smart use cases for our Strips sensors, since we are right in the summer BBQ season 🙂
search buzz
Another smart use cases for our Strips sensors, since we are right in the summer BBQ season 🙂
With 45% of the state still in exceptional drought, the solution to California’s water crisis may lie in emerging technology that could help to better reuse and conserve water. Here are six of the most promising new water conservation technologies to watch.
Strips Drip is highlighted as a solution to conserve water by its ability to sense water leaks.
Har I udfordringer med at håndtere det særlige rengøringsbehov på storrumskontorer med free seating, som COVID-19 har udløst? Med IoT har I mulighed for at sikre en effektiv rengøring af den enkelte arbejdsplads.
Tidligere har det kun været nødvendigt at registre om et skrivebord var ledigt eller ej, når medarbejderne i kontorer med free seating skulle finde en arbejdsplads. I dag er det nødvendigt at virksomheden kan sikre rengøring af skrivebordet, når en medarbejder forlader en plads og den skal stå klar til den næste bruger.
Det är Sensatives covid-lösning make:net a/s pratar om 🙂
Приобрести Sensative STRIPS можно по ссылке – http://z-wave.com.ua/p256369460-datch… Датчик открытия двери/окна Sensative STRIPS ― это самый тонкий беспроводной магнитный датчик для дверей и окон в мире! Предназначен для мониторинга и защиты состояния окон или дверей и отправки отчетов данных на контроллер Z-Wave. Датчик может быть установлен практически незаметно на рамах дверей или окон.
Das Tür- und Fenster-Sensor und “Q” das schlaue Licht Wir sind zertifizierter FIBARO Partner und Schulungscenter!
Website: http://mein-cleveres-haus.de/
Shop: http://shop.mein-cleveres-haus.de/
Akademie: http://akademie.mein-cleveres-haus.de/
As flexible office space grows, it’s important for landlords to create a service layer of software that can help them rise to new challenges.
For a landlord providing flex office space, it is crucial to offer a safe and sound environment. In these pandemic times, this includes sanitary safety.
When you chose a desk to start your work you need to be able to trust that it is clean and sanitized. Sensative is launching a new practical solution based on the new LoRaWAN sensor Strips Presence and a new Switch accessory.
Read more here: https://sensative.com/iot_use_cases/post-covid-19-clean-desks-on-demand/
Safety and security systems for homes have increasingly become necessary. They can control electronic locks for doors, windows, and the car garage from a digital panel inside the house.
If you want an undetectable intrusion sensor for easily breached home portals, consider getting the Sensative Z-Wave Plus Strips Invisible Window Sensor. The sensors are thin and seamless and use magnetic technology to detect when a window is opened. When the magnets pick up any changes, the sensor will alert you on your device.
The window sensor can be connected with an external alarm that can be programmed to go off when the system detects changes. It can be paired with home automation systems as well.
Commercial building managers are planning to increase COVID-19 cleaning budgets in 2021.
…Over half of the respondents expected a 10 percent or more increase in cleaning expenses. This was twice as much as the second-highest category, tenant engagement, which also could be due to increased need for communication around cleaning…
While this bump in budget for cleaning expenses is understandable, it might not be necessary. Even before the shutdown, most cleaning procedures were only optimized to about 65 percent of their potential output, now with lower occupancy that is more like 25 to 30 percent. Even with additional spot cleaning needs, we are finding that many buildings already have enough staff to handle their needs…
Sensative comment: Since it all comes down to optimizing resources you need detailed data on where and when cleaning is needed. Check out the Sensative cleaning-on-demand sensor solution: https://sensative.com/iot_use_cases/post-covid-19-clean-desks-on-demand/
Today I’m going to review and
Affiliate Product Links: Sensative Strip: http://amzn.to/2oEwErO
Osram Lightify RGBW LED Strip: http://amzn.to/2ogLubL
The Strips sensor is a battery operated z-wave plus device that has an incredibly low profile that can be used indoors or out. Most sensors are big and bulky. But not the Sensative Strips.
The sensor communicates to your hub using the z-wave plus protocol. One advantage to this is that the strip can be an extended distance from the hub since z-wave allows you to use other powered devices, like switches and lights, as repeaters.
At the time I recorded this video, the Sensative strip is not supported by the Wink Hub or Wink Hub 2. However, the Sensative Strip does work with Fibaro Home Center 2, Fibaro Home Center Light, Vera Edge, SmartThings and a few others. So, I’m going to connect this to my SmartThings Hub.
Now that this is installed, I want to connect this into Stringify so that I can do some other cool things. When the window is open, I’m going to trigger a stringify flow to turn on my TV backlight to Green. At the same time, it will automatically place my Ecobee3 smart thermostat to a setting that widens my high and low comfort setting range, which will prevent the thermostat from being too sensitive.
As I’ve mentioned before, one cool thing about creating your custom DIY smart home is that you can save on energy costs. When the sensor is triggered, it sends the notification over to Stringify. Stringify, in turn, runs a flow that controls lights that are controlled by my Wink Hub.
Julkalender med sensorer – Under vintern förvarar vi ofta våra saker – eller till och med fordon – i ouppvärmda och ibland fuktiga förråd, garage och källarutrymmen. Samtidigt är det ofta trånga utrymmen dit det kan vara svårt att ta sig för att inspektera status på till exempel textiler eller fordon. En modern lösning på problemet skulle kunna vara att använda en fuktsensor.
Fuktmätning med Sensatives LoRa Strips, Yggio för integrationen och data visat mha Microsoft PowerBI. Ett enkelt demo av möjligheter. Men vi kommer inte att utveckla detta vidare till en kommersiell tjänst. Någon som vill? Hör av er!
The latest version Indigo 7.3 now adds support for many Z-Wave sensors, including Strips by Sensative.
“The Strips Guard is overall easy to setup and integrate into Home Assistant. The sensor is plain without any flashing exterior, which makes it blend in nicely with most environments. “
A Strips Guard Review by Fredrick Biering
Data Infrastructure Management System (DiMS)
Sensative and Combain are thrilled to announce our strategic collaboration, marking a new era of AI-powered seamless indoor/outdoor geolocation solutions. The partnership will focus on creating a comprehensive solution for seamless indoor/outdoor geolocation that leverages AI algorithms and deep learning techniques.